I know speed queen is the best, but that’s too expensive for me to justify at the moment. I had the set that came with the house but the washer quit on me a few months ago, and the dryer looks to be from the early 90’s so it’s probably not long for the world either. I’ve been going to the Laundromat cause I simply didn’t want to deal with it.
However we’re working so much overtime now that I just can’t blow an hour per week sitting down for that. The dogs already made at me for how much time I’m gone. So anyways, what’s the best bang for your buck washer and dryer set? Samsung is out of the question and no IoT sets.
Any washer/dryer combination you can find USED in good working condition that has absolutely ZERO internet connectivity is the thing to get. I’d check local Habitat for Humanity “ReStore” resources if it were me.
I’d rather have a 15-20 year old set than anything new.
We have an LG All-inOne top loading washer/dryer. Other than occassionally draining and cleaning the filters as maintenance it has been working great. We can tell when we need to do the maintenance stuff when 6 minutes remaining lasts an hour or longer.
There was a ten year old LG all in one combo in my place when I moved in. It’s been three years and it’s working great. There is some “smart” functionality to it but I keep it offline so it will not be disabled by a timer or an update. I don’t have much experience with consumer model washer/dryers as we have communal industrial grade ones here in socialist hell Scandinavialand, but I’d recommend it.
My LG set has been going for 15 years or so.
Had to replace the valve assembly (wouldn’t stop filling, ~$40) and springs on the top load washer (kids played hide and seek and used the washer… ~$30 or so) and the dryer steam function doesn’t work anymore. Doesn’t detect water in the tank. Don’t care enough to fix it.
Otherwise, been solid.
I’ve gone through a number of machines in the past 15-20 years as I’ve had to move a bit (not moving machines).
My least favorite were any of the front loaders I’ve had. They washed ok, but the big front gasket always got gross and demanded frequent wiping/drying and you had to leave the door open or it would get mildew. One of them (electrolux) would frequently refuse to run the spin cycle. I had to learn the secret button combination to force a spin cycle. It also had a drain filter that was meant to catch lint and junk. It was only accessable if you tipped the machine over as the access was from underneath the machine. Terrible design.
I had another front loader, and it wasn’t as bad, but still mouldy gasket and stinky laundry from time to time. If you forgot and left a load in overnight, it was fetid. I became aware that using vinegar was very effective to de-stink towels that always had a stinky odor about them. Needed to do it a few times a year.
I had a cheap set of whirlpools for about two years, they were fine, but at that age, they should be.
Moved into a house with a fancy set of whirlpools, wifi and all that junk. Never used the app stuff, but the washer self-destructed about three years after I moved in. I don’t think they were very old when we got here. Some metal plate that the wash drum sat on, cracked and during a spin cycle it shattered making a horrible noise and that was that. Did not even bother trying to fix it.
I have a speed queen washer now and a bobo free gas dryer my brother gave me. Washer has been fine for about three years, no issues, washes a full load in 30 min. Very few options, it’s the basic model. The dryer shat a belt which I fixed with an accessory belt from a Chevy Trailblazer that I cut to be thin enough. Claude helped me find a belt that was the right length, who says AI is useless?
My wife’s grandmother had THE cheapest washer from home depot, I think it was branded as a Roper or something. It never had issues.
Some of my friends have LG machines. In both cases, there is a little flap on the front you are supposed to open and a hose with a plug inside. They say you have to pull the plug and drain the excess water after each load or the machine will stink. You also have to leave the door open. This seems like a lousy design.
Amana makes simple, reliable machines without any of the WiFi connected bullshit. We’ve had ours for the last 8.5 years and only had to replace a dryer belt earlier this year.
You can get used commercial speed queens for a similar price as new consumer units.
The nice thing is the commercial units are designed to be maintainable. Parts are available, and they’re designed to run for years in rough environments.
We have Maytag that are rebranded LGs from ~20 yrs ago. They’ve been pretty good. I did have to replace the main board in the washer at ~yr 5 (assume that was a fluke) and have replaced the drain pump twice (assume that might be a 10yr life on the pump) . (both are relatively simple repairs). The dryer hasn’t had any issues.
I like pro-consumer initiatives like this one: https://ledger.worseonpurpose.com/
Here’s a direct link to brands in the Appliance category for your convenience.
Great site
It might be the humid climate here in the SE US, but everyone i know with a front loader has mildew problems. Tablets, coatings, sani cycles- all band-aids for inherent design problems.
I’ve heard the same from my family in the northern Midwest. Front loaders just can’t be kept closed it seems or mildew forms.
In what way is the washer broke? If it’s old enough it may be worth fixing instead of buying something that won’t last as long.
OP: Where are you located? I can imagine the EU market being different than, say, the eastern Asian market.
I live in the EU, and the top brands appear to be Miele (although quite expensive) and Bosch / Siemens (better bang for buck). I have a Bosch dryer that has lasted almost a quarter century and is still going strong. My current washing machine is a 15 year old LG, so I am happy with the bang/buck ratio there. I did have the motor replaced though at one time, so that is a bit of a cheat.
I live in the US.
I’ve had good luck with LG buying new.
If I didn’t care about anything fancy, I’d probably talk to the local repair shop that refurbishes old units and sells them on the cheap with their own warranty.
This. I’ve heard so many horror stories about new appliances not lasting more than a couple years, tops.
When I have something I need to replace I’m going to go the second-hand route myself. Could not care less if it’s 10-20 years old.
Newer appliances are vastly more efficient in terms of energy costs.
And the vast majority don’t break. They also often have 5-10 year warranties depending on the brand.
I have had 3 appliances break, all within a year of purchase. But they were repaired for free on site, and have worked for 5+ years without incident after repair. They also use about 1/3 of the energy that the 1990s appliances they replaced and are far better at their jobs.
The ‘old stuff is better’ is a confirmation bias. You see the handful of appliances that lasted, not the 95% that failed. Most things will fail after a decade+ of use, and that’s normal, because materials only last so long.
Uh, no, not entirely true. You’re correct about some things though.
The vast majority of new appliances only come with a 1 yr warranty. It doesn’t matter if you lay down $500 or $10K, same bullshit warranty. There are a handful of notable exceptions like Maytag for example. And I’m purposefully avoiding the topic of “the warranty is only good if you can get a repairman to service it properly and in good faith.”
Older appliances are genuinely more reliable and repairable. There is an abundance of data available that supports this fact. But you are right about older appliances are less energy efficient. However, I’d rather have something reliable that uses more energy and will last 20-30 years instead of something shiny and efficient that will be in a landfill in less than 10 years. But that’s just me.
Everyone’s dumping on Samsung. I will say, I will never buy a Samsung fridge again.
I have a Samsung top loader washer and front loader Dryer purchased in May 2022.
Aside from a couple issues with the washer experiencing an unblance problem, they’ve been great.
I will avoid buying a dryer with the “hinged” lint trap in the future. That’s honestly my only beef. The dryer sensor is useless too, I set most things to the “bedding” setting, because otherwise a third of the laundry comes out a little damp.
Fun story the motor in every dryer that turns the drum is made by the same company.
Also, anything except for samsung.
2nd fun fact. Microwaves are all made by the same company too.
That’a not quite true. Microwave components are made by one of about three manufacturers, which is slightly better but not by much. Sharp, LG, and Panasonic to my knowledge.
True. Panasonic “inverter” microwaves are still Panasonic though, I think.
Also, Refrigeration is Midea, Daikin, and a handful of others in very limited applications; some American made AC, Mitsubishi heat pumps, Liebherr refrigerators.
Tv and computer panels are similar - I think it’s LG, Samsung, and one or two Chinese companies in the market. That Dell display? The Apple display? Probably LG.
I actually don’t hate my Samsung washer/dryer all in one unit but at the same time I don’t blame anyone for avoiding that brand like their lives depended on it.
That actually doesn’t surprise me at all.






