Actual poster from 1917 that made me laugh. A lot.
Also, those motherfuckers are measuring the weight of those balls in kilograms, aren’t they?
Actual poster from 1917 that made me laugh. A lot.
Also, those motherfuckers are measuring the weight of those balls in kilograms, aren’t they?
One kilometer is 1000 meters, one meter is 1000 millimeters. One square meter is 1,000,000 millimeters, one cubic meter is 1000 liters.
1 liter of water is 1 kilograms, so 1 cubic meter is 1000 kilograms. Sand is about 2.3 times heavier than water, so 1 cubic meter of sand is 2300 kilograms, or 2.3 metric tonnes.
I’m 1.96 meters tall, or 1 meter and 960 millimeters, or 1 meter and 96 centimeters. I weigh about 85 kilos, or 85.000 grams. Being 65% water, I carry about 55.25 kilograms of water, which will fill a little over 55 one liter water bottles
I can do this all day
Now let’s do the same with imperial units! You first, cuz I’m not going to touch that shit with a 10 foot pole…
One mile is 5280 feet, one foot is 12 inches. One square foot is 144 square inches, one cubic foot is 1728 cubic inches.
1 gallon of water is 8.34 pounds, and 1 cubic foot is 7.48 gallons, so a cubic foot of water weighs 62.38 pounds. If sand is 2.3 times heavier than water, a cubic foot of sand weighs 143.5 pounds.
I am 5 feet 10 inches tall, or 5.83 feet, or 70 inches. I weigh about 220 pounds, or 3520 ounces. If I’m 65% water, I carry about 143 pounds of water, or a little over 16 gallons.
Guh
Bit silly to mix decimal with non-base 10 measurements!
It’s worse than that. Inches are base 12, ounces and cups are base 16, machinists use thousandths of an inch, and surveyors use tenths of a foot!
And computers use base 2. Bastards.
I had to check the math because 1 m2 being 2300 kg while 1 cu ft at 143 lbs seemed crazy, but with the volume difference it’s all correct.
Thank you for putting in the effort 🙃
To illustrate, 1m³ = (100cm)³ = 1,000,000cm³ = (1000mm)³ = 1,000,000,000mm³
You go from the single dimensional conversion between m and cm being a factor of 100 and 1000 for m and mm, to the 3 dimensional conversion being a factor of 1 million for m and cm or 1 billion for m and mm. It scales up fast.
That was totally logical to me
Cool.
Also great way to miss the point. And great use of your calculator. The entire thing is that the metric system is not just “arbitrary amounts”, it’s all designed to fit together easily.
Now, no calculator. How many feet is 0.683 miles?
I know that 0.683 kilometers is 683 meters.
What a great snapshot of life in Canada
Actually, I think the entire world minus two or three countries,.one of them being the US of A.
By pure coincidence I do live in Canada, but I’m dutch. Also lived in Mexico. Everything is metric and easy, unlike the USA.
Your late reply made me realize I replied to the entirely wrong comment and yeah I make no sense.
I meant to reply to the farming comment mentioning insane mixed units like Liters per Acre
Height in imperial is kinda useful. If you say a person is 4 foot tall vs 6 foot tall it immediately paints a vivid picture
This isn’t some intrinsic value. What you’re used to makes the most sense. If you were used to measuring people’s height in meters, 1.3 meters vs 2 meters would paint just as vivid a picture.
You get used to it. 150cm versus 180cm, since I don’t often meet anybody four foot tall.
Classroom supplies for elementary school always included a 30 cm ruler, so you’d immediately know what 30 cm difference is
That paints nothing to me, nor anyone in the rest.od the world. That literally only works in the US and a few other thirds world countries…
1-80 versus 2 meter does the same and makes sense
This guy/gal specific gravities.