Dark thick beer can also work in place of cocoa, in my experience.

AMD with ray tracing isn’t great. Not as bad as it used to be, but pretty lackluster overall compared to Nvidia (and to a lesser extent Intel’s GPU offerings). Linux ray tracing via Proton is also not as optimized at present, so that can take something “passable” in windows and make it unplayable on an AMD card in Linux. If you get something overkill for the resolution you’re playing at that can somewhat make up the difference.

If you’re doing 1080p the 6600 is pretty solid. Or 7600, really. It CAN do higher resolutions, but then you’d need to start doing FSR scaling or drop settings to keep things smooth/consistent.

I’m just here to say Bazzite all the way. No clue what that poster meant by breaking issues or problems with rollback… Bazzite is literally designed to be the antithesis of both. The ONLY time I’ve had a problem with it was rebasing my laptop between Silverblue and Bazzite. Technically allowed, but I wouldn’t advise it as that did cause me stability problems. I’d blame Silverblue more than Bazzite in that case, however. A clean Bazzite install has been solid ever since.

You seem to be arguing it’s all about the implementation of the phoning home itself- I’m arguing that running the entire executable/binary through a virtual environment likely has far more drastic performance implications than a phone home, regardless of frequency. It probably IS mostly an implementation problem, but I’m more inclined to believe that the implementation of the Denuvo virtual environment is at fault, not just a server call and response delay. **EDIT: Apologies, forgot to include a link- see HERE. Looks like a substantial/measurable difference. Not massive, as measured here, but certainly enough that if your hardware is just barely able to run a game it could easily make or break the entire experience.

Regarding performance implications: I believe Denuvo DRM runs through a type of virtual machine environment. While this theoretically should be relatively transparent, there are definitely documented instances of it negatively impacting performance, sometimes severely. Maybe the VM it runs in is just bad with certain instructions/calls on certain CPU’s or api’s, hard to tell for sure. But it’s not nothing.

Self hosting Mealie could be a great option to take things into your own hands.

Possibly dumb question: why not use an Authentik outpost with a reverse proxy to enforce SSO? It wouldn’t be “baked in” so to speak, but it would be fully OIDC and as long as you’re just running it through a web browser. Biggest downside is you’d need 2 logins (one for the outpost and one for the app). I’d assume the sso is specifically for the extra security though, so that shouldn’t be a problem outside of it being a little hassle.

Oh baby, time to proselytize the masses of Lemmy and introduce a whole new set of suckers to “Fido”. It’s zombies with big Fallout vibes and is unironically one of the best C to B tier movies I’ve ever seen. It’s the kind of movie where it looks like everyone involved was just having fun with it, ya know? Check it out and make sure to let me know what you think!

Both glowing portions are natural gas pipes. Perhaps it’s somehow ignited inside the pipes and is super heating them but also somehow NOT travelling outside the two glowing sections and burning the house down???

Same boat as you. The HOA maintains a pathway in a wetlands reserve right behind the residential area and it costs less than $20/mo.

They don’t really care what you do besides the following: no farm animals/chickens, no structural changes to the homes without a licensed contractor performing the construction, shoot an email to the HOA if you’re going to replace your roof or repaint your house to keep SOME level of uniformity.

Mostly they don’t care. Hell, the CC&R’s and HOA incorporation docs literally say they won’t directly enforce things against you and leave it up to the neighbors to take you to court with the HOA docs/agreements as free ammo. So if you explicitly want to be a menace to your neighbors/piss people off or want to have the only bright ass neon pink home with custom additions in the entire neighborhood - probably not the place for you. Otherwise they’ve had no effect on myself or my neighbors whatsoever and the wetlands/park is really nice.

Showerthoughts maybe?

Why would I recommend Fileflows? It was a little more user friendly in my experience without requiring pulling in configurations from other sources. I know there are repos chalk full of Tdarr settings and configs, but for simple setups and DIY I preferred the Fileflows interface. The end result is basically the same, so pick your poison.

Isn’t AMD’s HEVC/265 still decent, specifically? I feel like I read that somewhere years back. 264 has always been a weak spot for them, however.

I might recommend fileflows over tdarr- but either way some kind of similar solution is almost mandatory with the grab bag of arbitrary encodings you find out there.

Very true. But brute force checking through tons of different settings for each camera you need to configure is not fun. I couldn’t seem to find any kind of “known working configs” database or anything either. Every camera seems to be different in what it expects, outputs, authenticates, etc. Once it’s set up, I agree, maintaining the config is easier. Having all your cameras match in model and firmware version probably makes the whole endeavor MUCH easier.

AmCrest and Frigate together are SO good. Integrating Frigate with Home Assistant was also insanely easy for quick viewing and notifications. That initial Frigate config is a bit of a bear- but once you’re past that I cannot speak more highly of it.

hunter2

A gallon glass carboy is $20-25 and that’s going to be your biggest up front expense. That’s reusable, however so once you’ve got that you’re not going to need another for simple small batches. Champagne yeast is like $10-20 for 10-20 packs (figure a dollar per pack) and each pack can easily make 2 gallons if you’re smart enough to split it in half. 3lbs of raw honey from Costco will run $12-15 and a gallon of boiled water rounds out your list. Yeast nutrient is probably a good idea since it almost guarantees good results (1lb is like $10-15 and you only use 1/4 tsp or so per gallon batch). One-way air locks for brewing with stoppers are $2-10 depending on how many you buy (also reusable). So your first batch is your most expensive at $85 absolute worst case with today’s prices. From there on out subsequent batches cost only the honey, water, and any fruit or spices you want to try adding. As far as hobbies go, that’s not bad considering how much variety there is in it. I can’t comment on beer, but mead is dead simple as long as you keep everything sanitized before and after brewing.

As someone who makes meads/wines in a closet and has done so while renting, I don’t particularly see the relevance as long as your batches are small and contained… Typically, the tools and ingredients aren’t wildly expensive either if you’re keeping things simple (in the US, anyways). Honestly, I don’t see how more demographics don’t get into the basics of homebrewing. It’s dead simple to make something “passable” and with time and effort you can even make something good/great!